Patio & Outdoor Concrete Coatings
Give your patio a finished look with an outdoor coating system selected for your space. We evaluate concrete condition, moisture, sun exposure, and drainage before recommending a finish.
Five Star Epoxy & Coatings installs professional-grade, USA-made Simiron coating systems on patios, porches, front entries, walkways, balconies, and pool decks throughout Los Angeles and the San Fernando Valley. Every outdoor project starts with mechanical diamond grinding, and every recommendation is based on how your concrete and your space actually perform outdoors.
OUTDOOR SPACES WE COAT
Patios, Porches, Walkways & More
Outdoor concrete deals with direct sun, rain, irrigation overspray, and daily foot traffic. We coat the outdoor surfaces homeowners use most.
Outdoor Living Areas
- Back patios and covered patios.
- Balconies.
- Pool decks.
Entries & Paths
- Front entries and porches.
- Walkways and side yards.
Why evaluate each space? Each of these areas sees different sun, water, and foot traffic, which is why we select the coating system for the space instead of using one finish everywhere.
A FINISH SELECTED FOR YOUR SPACE
Evaluation First, Then a Recommendation
Before we recommend an outdoor finish, we look at the conditions your coating will actually face.
The concrete receives the same attention to surface preparation as our garage floors, including mechanical diamond grinding.
We evaluate:
- Concrete condition, cracks, and previous coatings
- Moisture in the slab
- Sun exposure
- Drainage and standing water
Why evaluate first? Outdoor concrete varies more than a garage slab. Matching the system to your space is how we get a finish that looks right and holds up.
WHAT WE EVALUATE
Every outdoor space is different. Here is what we check during your estimate and how each factor shapes the finish we recommend. We will walk you through the findings and help you choose the right system, color, and texture for your project.
| WHAT WE EVALUATE | WHAT WE LOOK AT | HOW IT SHAPES Your Finish |
|---|---|---|
| Concrete Condition | Cracks, pits, surface wear, and previous coatings | Repairs and diamond grinding needed before coating |
| Moisture | Moisture conditions in the slab | Whether moisture mitigation is needed for proper adhesion |
| Sun Exposure | Direct sun versus shade | Topcoat and color recommendations for sun-exposed areas |
| Drainage | Slope, standing water, and runoff | Texture and slip-resistant options for wet areas |
| How You Use It | Foot traffic, furniture, and pool use | Flake, color, and texture recommendations |
A Premium Coating Is Only as Good as the Concrete Preparation Underneath It
Preparation is one of the most important parts of any coating installation. Outdoor concrete is often more weathered than a garage slab, so every Five Star outdoor coating starts with mechanical diamond grinding.
Diamond Grinding, Not Acid Etching
We mechanically diamond-grind the concrete rather than relying on acid etching or simple chemical cleaning. The purpose isn’t to remove more concrete than necessary. We remove the weak surface layer, contaminants, and previous coatings when necessary, along with enough sound concrete to create the proper surface profile for the coating system to mechanically bond to.
Edges, Borders & Transitions
Edges, borders, and areas next to walls, planters, and door thresholds are prepared with handheld grinding equipment, so the surface is properly profiled edge to edge, not just in the open middle of the patio. We use HEPA-filtered dust collection throughout the grinding process.
Repairs Before Coating
Cracks, pits, and surface imperfections are repaired as necessary before the base coat is applied.
Moisture, Traction & Sun Exposure
Outdoor coatings face conditions an indoor floor never sees. Here is what else we evaluate and offer.
WHAT YOU’RE PAYING FOR
We’d rather show you what goes into your outdoor coating than simply tell you we’re the best. Here’s what every Five Star patio and outdoor project is built on.
Free Estimates & Flexible Payments
Here’s what’s included when you request an estimate, and how payment works.
FREE QUOTE
Have a project in mind? Request a call with Randy, the owner of Five Star Epoxy & Coatings, Inc. to get started. Every application setting is different and an in-person visit is recommended for an accurate quote.
Epoxy Flooring Service Areas
We provide professional concrete coating and epoxy flooring for residential and commercial properties throughout the San Fernando Valley and surrounding areas within an approximately 60-mile radius, delivering durable, high-performance solutions for garages, commercial spaces, and industrial facilities—contact us to confirm availability and get a free estimate.
- Bell Canyon, CA
- Calabasas, CA
- Canoga Park, CA
- Chatsworth, CA
- Encino, CA
- Granada Hills, CA
- Hidden Hills, CA
- Northridge, CA
- Porter Ranch, CA
- Santa Clarita, CA
- Sherman Oaks, CA
- Simi Valley, CA
- Studio City, CA
- Tarzana, CA
- Topanga Canyon, CA
- Valencia, CA
- Van Nuys, CA
- Woodland Hills, CA
